concrete-repair
concrete-repair
2

Concrete Admixture – Special Air-entraining Admixture for Polycarboxylate Superplasticizer (PC-AE)

Product Name: Special Air-entraining Admixture for Polycarboxylate Superplasticizer (PC-AE)
Type: PC-AE

Package: 180 kg /drum

Uses
Product properties
Dosage

Read More…

REQUEST A SAMPLE

Special Air-entraining Admixture for Polycarboxylate Superplasticizer

PC-AE

Composition: a mixture of a high molecular polymer

Product properties

Item Index
Active content about 33%
Appearance at 20 Celsius colorless transparent or pale yellow liquid
Density at 20 Celsius about 1.05 g/cm3
pH of 1% solution about 7-9
Solubility at 20 Celsius Can be dissolved in water
Sodium content ≤ 3%
Solubility Can be dissolved in non-ionic and anionic surfactants
Biodegradability PA-AE is readily biodegradable

Uses

  • PC-AE can be used as air-entraining agent for concrete, mortar and the other products, especially for wet concrete environment of hard water and an alkaline environment (high calcium ions and high PH value).
  • Compared to the other air-entraining agents, PC-AE’s efficiency is higher and its lower amount could achieve the same air-entraining effect. PC-AE also has a specific application, such as the foaming agent of floor tile.
  • PC-AE can produce a large number of uniform microbubbles in concrete admixtures, whose foam particle size is below 300 microns in dry concrete. The air content is up to 5%.

Dosage

PC-AE’s dosage is 0.01-0.1% of water-reducing agent’s weight.

Storage

> 30℃ storage will cause the surface gel. After stirring, the gel will be eliminated and may be used again. If the product is in <20℃ environment, there may be precipitation in effective material. You can re-heat and stir this product to be mixed unevenly. However, the heating temperature is not higher than 50 ℃.

Shelf Life

At room temperature, PC-AE can be stable for one year without opening the storage. The prolonged storage will lead to the lower PH value.